Lector sin contacto NozzleCrocodile

Crocodile

Contactless injector pulse reader

Nozzle BMCrocodile is used within vehicle telematics and GPS tracking systems for fuel consumption monitoring of personal cars and small commercial vehicles.

Nozzle BMCrocodile reads control pulses from wires of engine injector (nozzle) and converts them into normalized pulses, which are sent to data processing unit. Number of sent pulses is directly proportional to the volume of consumed fuel.

Petrol and gas fuel consumption control

Task

Fuel consumption monitoring from CAN bus dataPetrol and gas fuel consumption control of the small commercial vehicle

Advantages of Nozzle BMCrocodile

Contactless reader Nozzle BMCrocodile

Safe connection to nozzle control wires

NozzleCrocodile reads signals through wire insulation without damaging wires. Contactless readers has no influence on signals in control wires.

Operation without presetting

NozzleCrocodile is a ready-to-use pulse counter, which does not require pre-configuration – no service kits, no service software.

Universal pulse output

NozzleCrocodile can be connected to almost any telematics unit or display, equipped with pulse counter input.

NozzleCrocodile installation

Nozzle BMCrocodile installation

Recommended tracking devices

This table contains information on integration tests of Nozzle BMCrocodile and various telematics units, carried out to confirm compatibility and accuracy of data. To get more detailed info on connection and set up – click on link or logo of corresponding telematics unit in the table.

Generally, Nozzle BMCrocodile reader can be connected to any pulse-counting input with corresponding technical specifications. Nozzle BMCrocodile’s output signal is the same as DFM fuel flow meter’s with pulse output. See Technoton Document Center for more information.

Level of message losses at 250Kbps, %, not more
Compatibility
Nominal supply voltage, V 12/24
Cable length 0.7
Operating ambient temperature, 0C -40…+ 85
Cable construction connector

 

Supply voltage can be 5V, cable can be of any length – upon special order.

Characteristics of_NozzleCrocodile output signal
Characteristics of_NozzleCrocodile output signal

Crocodile contactless reader

Other contactless readers

CANCrocodile

Contactless CANbus (J1939) data reader

Contactless reader CANCrocodile

1708Crocodile

J1708 (SAE J1587) bus data reader

Contactless reader 1708Crocodile

CANCrocoLITE

Compact CANbus (J1939) data reader

Contactless reader CANCrocoLITE

FMSCrocodile

Contactless reader and FMS gateway in one device

Contactless FMS gateway FMSCrocodile

Footer 1 eng

Contact us

+375 17 240-39-73

E-mail: [email protected]
Viber: +375 44 792 67 58
WhatsApp: +375 44 792 67 58

Technical support

+ 375 17 240-43-21

E-mail: [email protected]

About us

Dealer program

Virtual tour

Blog

Cases

Digital catalog